User Manual
Table Of Contents
- Book 1: Setup & Maintenance
- Table of Contents
- Chapter 1
- Introduction
- Chapter 2
- Setting Up the System
- Setup Requirements
- Given Workstation
- DataRecorder and Cradle
- Storage Space for the PillCam Capsule Box
- Main Platform Components
- Connecting the Components
- Connecting the Given Workstation
- 1. Connect the Mouse cable to the Mouse connector.
- 2. Connect the Keyboard cable to the Keyboard connector.
- 3. Connect the monitor to the Workstation.
- 4. Connect the printer to the LPT connector or to the USB connector, depending on the printer’s connection cable.
- 5. If the Workstation’s voltage setting is manual, verify that the Workstation’s voltage matches the local voltage. If it does not, call Given Customer Support.
- 6. After voltage verification, connect the power cable of the Given Workstation to the electric outlet.
- 7. Connect the power cable of the monitor to the wall electric outlet.
- Connecting the DataRecorder Cradle
- Chapter 3
- Software Installation
- Chapter 4
- Multi-User Setup
- Chapter 5
- Technical Description
- System Labeling
- Essential Performance
- Warnings
- Cautions
- System Specifications
- PillCam SB Capsule
- PillCam SB 2 Capsule
- PillCam ESO 2 Capsule
- PillCam ESO 3 Capsule
- PillCam COLON 2 Capsule
- SensorArray DataRecorder 2
- SensorArray DataRecorder 3
- SB SensorBelt for DataRecorder 2 and DataRecorder 3
- DataRecorder 2 /2C
- Cradle DataRecorder 2
- DataRecorder 3
- Cradle DataRecorder 3
- DC Power Supply
- DataRecorder 3 Memory Card
- RAPID Software
- Guidance and Manufacturer's Declarations
- Chapter 6
- Maintenance
- Chapter 7
- Troubleshooting
Technical Description
Chapter 5 47
Cradle DataRecorder 3
DC Power Supply
DataRecorder 3 Memory Card
Properties
Weight 250 g
Operating temp
0–45
°C
Color White & Black
Mains power
connections
1x male power cable plug
power mains range
Input Voltage: Maximum 5.25V, Min 4.75V
Input Current: Maximum 4A, Min 100 mA
Properties
Weight 300 g
Input connector 3 pole AC inlet IEC320-C14C
Input Voltage 90 - 246 VAC
Output voltage 5V DC, 5 Amp
Protections
Short circuit/ Over load/ Over voltage/
Over temp.
Properties
Dimensions 24mm x 32mm x 2.1mm
Weight
2.5 g
Capacity
>
16GB
Rating
Class 6: 40X or higher,
6 MB/sec minimum data transfer rate
Storage
temperature
-40
°C–85°C
Security
Built-in write-protect switch prevents
accidental data loss
Compatibility
SDHC host devices; not compatible with
standard SD-enabled devices/readers
File format
FAT 32