User Manual
Table Of Contents
- Book 1: Setup & Maintenance
- Table of Contents
- Chapter 1
- Introduction
- Chapter 2
- Setting Up the System
- Setup Requirements
- Given Workstation
- DataRecorder and Cradle
- Storage Space for the PillCam Capsule Box
- Main Platform Components
- Connecting the Components
- Connecting the Given Workstation
- 1. Connect the Mouse cable to the Mouse connector.
- 2. Connect the Keyboard cable to the Keyboard connector.
- 3. Connect the monitor to the Workstation.
- 4. Connect the printer to the LPT connector or to the USB connector, depending on the printer’s connection cable.
- 5. If the Workstation’s voltage setting is manual, verify that the Workstation’s voltage matches the local voltage. If it does not, call Given Customer Support.
- 6. After voltage verification, connect the power cable of the Given Workstation to the electric outlet.
- 7. Connect the power cable of the monitor to the wall electric outlet.
- Connecting the DataRecorder Cradle
- Chapter 3
- Software Installation
- Chapter 4
- Multi-User Setup
- Chapter 5
- Technical Description
- System Labeling
- Essential Performance
- Warnings
- Cautions
- System Specifications
- PillCam SB Capsule
- PillCam SB 2 Capsule
- PillCam ESO 2 Capsule
- PillCam ESO 3 Capsule
- PillCam COLON 2 Capsule
- SensorArray DataRecorder 2
- SensorArray DataRecorder 3
- SB SensorBelt for DataRecorder 2 and DataRecorder 3
- DataRecorder 2 /2C
- Cradle DataRecorder 2
- DataRecorder 3
- Cradle DataRecorder 3
- DC Power Supply
- DataRecorder 3 Memory Card
- RAPID Software
- Guidance and Manufacturer's Declarations
- Chapter 6
- Maintenance
- Chapter 7
- Troubleshooting
Technical Description
Chapter 5 45
SB SensorBelt for DataRecorder 2 and DataRecorder 3
DataRecorder 2 /2C
SensorBelt Insert
Dimensions 365 mm x 90 mm
Insert material Polypropylene
Number of sensors 4
Sensor dimensions Diameter 40 mm
Cable length 550 mm
Cleaning method Wipe with medical alcohol wipes
Expected life 500 procedures
SensorBelt Cover and Straps
Cover dimensions 385 mm x 125 mm
Cover and strap material 100% polyester
Fits abdomen size 60 - 130 cm
Washing instructions
Machine wash, warm, Use mild detergent
Hang dry
Do not dry clean, Do not use bleach
Expected life 40 wash cycles
Software Proprietary firmware
Recording capacity DataRecorder 2: @2fps for 10 hours
DataRecorder 2C: @4fps for 10 hours
Weight 500 gr., including battery pack.
Operational Power 6–8 VDC, 0.1–0.3 A
Battery type Internal, Li-Ion, 7.2 V, 4400 mAH
Battery Pack weight 200 gr.
Operating temp.
0–40
°C
Storage temp.
0–55
°C
Shielding Shieldex Supra, from Less EMF Inc.
Classification • internally powered (complies with requirements for
Class I equipment while connected to supply mains
through charger)
• Type BF applied part
• Ordinary equipment