User's Manual

Troubleshooting

Given Imaging Ltd.

My computer\properties\Network Identification\Full

computer name=RAPID. If not, change to RAPID and

restart the computer.

Data Recorder Operation

To check the Data Recorder operation, always verify that the

Data Recorder LED blinks as soon as you connect it to the

Battery Pack in the following blinking sequence:

The Data Recorder green LED blinks, turns on and then off.

Once the recording starts the LED blinks at the receiving rate.

PROBLEM #1

The LED of the Data Recorder does not blink upon

connecting the Battery Pack to the Data Recorder.

SOLUTION

•

Change the Battery Pack. If the problem persists:

•

Change the Data Recorder and repeat the Recorder

Initialization process.

•

Call technical support to report the faulty Data

Recorder.