User's Manual

RAPID™ Application
Given Imaging Ltd.
44
6. Open the Gender drop-down list and select the required
gender.
7. Under Birth Date, click the arrow and select the required
date of birth.
8. Open the Physique drop-down list and select either
skinny, normal, stocky or potbelly. Use the following
figure:
skinnyskinny
stockystockynormalnormal potbelliedpotbellied
9. Under Protocol Number, enter the code of the clinical
trial protocol, you have been assigned by Given®
Imaging Limited, Division of Medical Affairs.
10. Under Test Date, enter the date of the test.
11. Click Check-In Patient.
In the Message area, a message appears asking you to
connect the Data Recorder to the Data Recorder cable.
12. Connect the Data Recorder to the Data Recorder cable.
Connect the 9-pin Female connector of the Data