User's Manual

Given Imaging Ltd.
28
Chapter Three
Getting to Know RAPID™
Running the RAPID™ Application
Running the RAPID™ ApplicationRunning the RAPID™ Application
Running the RAPID™ Application
The RAPID™ Application software complies with the
conventions of Windows® operating system applications
conventions. However, various functions of the Windows
operating system are disables or modified to enable the
proper function of the RAPID™ Application..
During its operation, the RAPID™ Application writes files
and reads files from pre-defined locations on the RAPID™
Workstation hard disks. Handle files only through the
RAPID™ Application and not by using the Windows
Explorer application. Do not change directory and file names.
Note:
The directory and file names should not be modified unless
under instructions from Given® Imaging technical support.
There are two hard disks in the RAPID™ Workstation. It
allows a total separation of RAPID™ Application software
from RAPID™ Application data. The RAPID™ Application
data is always written to disk E. Raw data downloaded from
the Data Recorder is written to the Recorder data directory