User's Manual

System Setup
Given Imaging Ltd.
26
!
To connect the Connection Box
1. Connect the 9-pin Male connector of the Connection Box
to the serial Com 1 of the Workstation with the 9-pin
Female-Female connection cable.
2. Connect the LAN cable to the LAN connector of the
Connection Box.
3. Connect the Connection Box to the Power supply.
4. Connect the Power supply to the electric socket.
5. Verify that the Control LED is on.
6. To connect the Recorder cable to the Connection Box,
connect the Male connector of the Recorder cable to the
Female connector of the Connection Box.
Note:
Connect the Recorder to the Connection Box only when
instructed to do so.