User's Manual

Overview
Given Imaging Ltd.
6
Sensor Array
The Sensor Array receives data from the M2A™ Capsule and
transfers it to the Data Recorder. It is comprised of 8 identical
sensors. Each sensor is connected to the Data Recorder
module by a flexible coaxial cable. The sensor is built of
flexible printed circuit board (PCB) and is attached to the
skin by means of disposable, medical adhesive pads.
Battery Pack
The Battery Pack is the power supply of the Data Recorder. It
includes 8 Nickel-metal 6V rechargeable batteries. The
Battery Pack is disconnected from the Data Recorder at the
end of each examination and is connected to the Charger
supplied with the Given® Diagnostic Imaging System to be
ready for the next procedure.
Waist Belt
The Waist Belt is an adjustable waist-belt that includes two
pouches to hold the Data Recorder and the Battery Pack. The
belt also includes a flap to hold the excess Battery Pack-Data
Recorder cable. The Waist Belt also contains shielding that
facilitates FCC compliance. The Waist Belt must therefore
be worn at all times while the M2A™ Capsule is active
inside the patient.
Battery Charger
The Battery Charger charges the Battery Pack and should be
used after each examination.