User's Manual

Troubleshooting
Given Imaging Ltd.
100
Sensor Array
Sensor Array Condition
PROBLEM
The Sensor Array you use is worn or torn.
SOLUTION
Use another Sensor Array supplied by GivenĀ® Imaging
Limited. Do not use a torn or a worn Sensor Array.
Sensor Location
PROBLEM
You applied a sensor to the wrong location.
SOLUTION
1.
Remove the sensor from its location.
2.
Carefully, take the sensor out of the adhesive sleeve.
3.
Insert the sensor in a new adhesive sleeve.
4.
To secure the sensor in the adhesive sleeve, remove the
liner from the adhesive area at the opening of the
adhesive sleeve and press the two lips together.
5.
Reapply to correct location.