User's Manual

PillCam Capsule Endoscopy
58 Fitting Equipment on the Patient
PillCam Recorder Belt
To fit the recorder belt:
1. With the patient standing, place the belt around the patient’s waist.
2. Adjust the belt to fit the patient. Add the belt extension if needed.
3. Make sure that the PillCam recorder DR2 pouch is at the patient’s hip as shown here. The belt has a
Velcro strap for attaching the pouch, allowing the patient to adjust the pouch as needed.
4. Adjust suspender length and location to fit the patient.
PillCam Recorder DR2 and DR3
To assemble PillCam recorder accessories:
1. Remove the PillCam recorder from the cradle. If the PillCam recorder is properly initialized and ready
for the procedure, the capsule LED is constantly on in orange.
2. Verify that the battery is fully charged:
• For PillCam recorder DR2, all battery LEDs should light up.
• For PillCam recorder DR3, the battery icon on the screen should be .
֠
֠֠
֠
Note
There are three belt configurations (PillCam recorder DR2 only):
• the standard recorder belt for patients over 85 lbs (40 kg),
• the small recorder belt for patients under 85 lbs (40 kg),
• the standard recorder belt with the belt extension for very large patients.
PillCam recorder DR2
in pouch on the left
Suspenders