User's Manual

PillCam Capsule Endoscopy
50 Performing Patient Check-in
15. In the Procedure Information Confirmation screen, verify that the patient and procedure data is
correct:
• If the data is incorrect, click
Back and return to a previous screen to correct the mistake.
• If the data is correct, select Accept, and then click Finish to continue. When the Patient Check-in
complete screen appears, click Ready to proceed.
Updating Patient Details
Patient details are collected during the Patient Check-in process. However, RAPID allows you to change
or update all the patient information after a video creation.
To update patient details:
1. Find the study in the Study Manager.
2. Right-click the study and select Update Patient Details.
The following screen appears. Make the desired changes and click Next until you have completed your
update.
֠
֠֠
֠
Note
When the patient check-in is complete, the capsule LED on the PillCam
recorder lights up in orange.
After patient check-in, keep the PillCam recorder in its cradle until the
capsule ingestion procedure begins.