User's Manual

PillCam Capsule Endoscopy
120 Overview of the RAPID Interface
Review Group Buttons
Viewing Layout Group
This ribbon group contains tools for customizing the video display from one video head: Single, Dual,
Quad, and Mosaic view. The tools maximize reading efficiency by simultaneously displaying consecutive
images in one easily viewed image.
Button Function
Standard Review mode: This button sets the standard review mode for
PillCam SB 3 (AFR), PillCam COLON 2, PillCam ESO 2, and PillCam
ESO 3/UGI procedure videos.
Display rate can be set by the user by moving the viewing speed slider.
A-mode Review mode: This button sets the review mode to show the A-
mode (Automatic) video created for all PillCam SB 2 as well as for all
PillCam SB 3 with PillCam recorder DR2 procedure videos.
M-mode Review mode: This button sets the review mode to show the M-
mode (Manual) video created sequentially from all captured images for
PillCam SB 2 as well as for all PillCam SB 3 with PillCam recorder DR2
procedure videos if creation of M-mode video is enabled in Settings.
By default, creation of manual mode video is disabled during download.
To enable manual mode, see
Video Creation Section on page 174.
֠
֠֠
֠
Note
Dual and Quad views are available only when viewing the video from one
video head (that is, from one end of the capsule).
Button Function
Single view: Shows the video in Single view, one single frame on the
screen.
Dual view: Shows the video in Dual view, which displays two
consecutive frames side by side at the same time. Frames 1 and 2,
then frames 3 and 4, then frames 5 and 6, etc. This is different than
dual-head capsule videos that display a single frame from each of the
two capsule heads simultaneously side by side.
Quad view: Shows the video in Quad View, which displays four
consecutive frames. The order of the images is presented in a
clockwise fashion.