User's Manual

PillCam Recorder Maintenance 201
Appendix A3
PillCam Equipment Maintenance
PillCam Recorder Maintenance
Use only a fully charged (eight or more bars displayed on the battery icon) PillCam recorder. In general,
including first-time use, charging the PillCam recorder is an overnight process and should not be
performed in the vicinity of the patient. When you receive the PillCam recorder after an examination,
charge it immediately until the green LED is lit, and leave it in its cradle.
Important Safety Instructions
!
Warning
Charge the PillCam recorder only with the supplied cradle. Once you have
placed it into the cradle, the PillCam recorder automatically starts charging.
!
Caution
The SD card should never be removed or reinserted when the PillCam
recorder DR3 is ON.
֠
֠֠
֠
Disclaimer
The PillCam recorder cradle is a non-medical device, used for charging the
PillCam recorder from Given Imaging Ltd. For full specifications, see System
Specifications on page 217.
֠
֠֠
֠
Note
Before using the PillCam recorder cradle, read all instructions on cautionary
markings on the cradle, on the battery, and on the PillCam recorder.
!
Warning
Changes or modifications to this equipment not expressly approved
by the party responsible for compliance (Given Imaging Ltd.) could
void the user’s authority to operate the equipment.
!
Warning
• The cradle is for indoor use only.
• Never charge non-rechargeable batteries.
• All cells containing mercury, cadmium, lithium or lead as electrochemical
substances are subject to special waste disposal requirements.
• This charger is a class A product. In a domestic environment, this
charger may cause radio interference.