User's Manual

PillCam Capsule Endoscopy
190 Regimen Manager
Printing the Patient Instructions
You may need to print both types of Patient Instructions for the patient:
• The pre-capsule ingestion instructions need to be handed to the patient 1 or 2 days prior to the
ingestion and are needed for proper preparation of the patient for the procedure.
• The post-capsule ingestion instructions need to be printed and handed to the patient after capsule
ingestion. The reminder numbers on the screen of the PillCam recorder DR3correspond to numbered
instructions in the post capsule ingestion patient instructions but the instruction is not detailed on the
PillCam recorder screen. You must print the post-capsule ingestion patient instructions for the patient
to allow the association of the alerted number with the instruction details.
To print the Pre-capsule Ingestion Regimen Instructions:
1. Select the Pre-capsule Ingestion tab. The relevant screen appears displaying all the regimens or
patient instruction templates available.
2. Select your item and click Print.
To print the Post-capsule Ingestion Regimen Instructions:
• Click Print Regimen during the patient Check-in stage (see Performing Patient Check-in on page 43),
the patient's details are included in the printout.
• You can also print out the personalized post-capsule ingestion instructions after completing the check-
in by going to the Study Manager, right-clicking the patient details and selecting the Print Preview
Regimen option.
• You can also print out the post-capsule ingestion instructions (without the patient's details) via the
Regimen Manager, as follows:
a. From the Home screen, select Tools > Regimen Manager.
b. Select either the Post-capsule Ingestion tab or the Pre-capsule Ingestion tab. The relevant
screen appears displaying all the regimens or patient instruction templates available.
c. Select your item and click Print.
Print Layout of the Post-Capsule Ingestion Instructions
The Regimen Manager enables two convenient print layout options for the post-capsule ingestion
instructions. The desired default layout can be configured in the RAPID settings, by clicking the Report
tab and selecting either pocket format or page format.
֠
֠֠
֠
Note
RAPID will print the regimen only if the regimen you selected is approved
by a physician (This Regimen is approved. appears next to the Approve
Regimen button at the bottom).