User's Manual

Configuring RAPID Software
RAPID Settings 171
General Tab
From the Home screen, select Tools > Settings. The Settings screen appears showing the General
tab.
After making the changes to the settings, click Apply to accept the new settings or click Cancel to close
the Settings screen without accepting any changes. Clicking OK will accept the new settings and close
the Settings screen.
User Information Section
The physician name, facility name and address (where the procedure was performed) and the facility
logo entered during configuration show on the endoscopy report.
To define user information:
1. From the Home screen, select Tools > Settings. The Settings screen appears.
2. In the User Information section, type in the Physician Name.
If you do not enter the physician name here, no physician name appears on the CE report.