User's Manual

3. Insert the SO-DIMM memory module into the SO-DIMM socket.

4. Confirm that the SO-DIMM is securely inserted into the socket.

5. Reconnect the cable to the board on the inside of the bottom cover.

6. Replace the bottom cover and secure with four M2.5*5mm screws.

4.2 M.2 SSD Installation

1. Remove the bottom four M2.5*5mm screws to remove the bottom cover.

2. Open the bottom cover and unplug the cable connected to the board on the

inside of the bottom cover.

3. Remove the two M2.5*6mm screws securing the DIO module and remove the DIO

module.

4. Insert the M.2 SSD module into the M.2 socket and secure with the M2*4mm screws.

5. Insert the DIO module and secure with two M2.5*6mm screws.

6. Reconnect the cable to the board on the inside of the bottom cover.

7. Replace the bottom cover and secure with four M2.5*5mm screws.