User's Manual

4.1 SO-DIMM Memory Installation SO-DIMM Memory Installation
1. Remove the bottom four M2.5*5mm screws to remove the bottom cover.
2. Open the bottom cover and unplug the cable connected to the board on the
inside of the bottom cover.
35
3. Insert the SO-DIMM memory module into the SO-DIMM socket.
4. Confirm that the SO-DIMM is securely inserted into the socket.
5. Reconnect the cable to the board on the inside of the bottom cover.
6. Replace the bottom cover and secure with four M2.5*5mm screws.