User's Manual

3.2.11 PoE LEDs
4 LEDs indicate the PoE status. The LED will light when the PoE port links to PoE PD of
each device.
The photo is only
IoTEDGE3100M.
20
3.3 Rear Panel I/O Functions
To fit more general application requirements, IoTEDGE3100M offers more I/O functions on
its rear panel. In this section, we’ll illustrate each I/O function on the rear panel.
3.3.1 3-Pin Euro type Terminal Block for System DC Input
Eagle Eyes AI allows a wide range of DC power input from 9V to 36Vdc. It offers a 3-pin,
pitch 5.08mm Euro Type pluggable terminal block. The 3-pin power connector is used to
connect the power plug of an AC/DC adapter. It’s convenient for indoor usage where AC
power is usually available. Since there is no specific rule of pin definition for this type of
connector, please always confirm the polarity of the power connector in prior to plug it into
IoTEDGE3100M if you’re not using the power adapter provided by Enbik.
Note
☞