User's Manual

GPIO/Isolated DIO Terminal Block
Programmable DIO
18
Pin Description Pin No. Description
1
GPIO10 (Default
GPI bit0) 11
GPIO0
(Default GPO bit0)
2
GPIO11 (Default
GPI bit1) 12
GPIO1
(Default GPO bit1)
3
GPIO12 (Default
GPI bit2) 13
GPIO2
(Default GPO bit2)
4
GPIO13 (Default
GPI bit3) 14
GPIO3
(Default GPO bit3)
5
GPIO14 (Default
GPI bit4) 15
GPIO4
(Default GPO bit4)
6
GPIO15 (Default
GPI bit5) 16
GPIO5
(Default GPO bit5)
7
GPIO16 (Default
GPI bit6) 17
GPIO6
(Default GPO bit6)
8
GPIO17 (Default
GPI bit7) 18
GPIO7
(Default GPO bit7)
9
Digital Input
COM 19
GND
10
GND
20
VCC
Isolated DIO
Pin Description Pin No. Description
1
Isolated
DI bit0 11
Isolated
DO bit0
2
Isolated
DI bit1 12
Isolated
DO bit1
3
Isolated
DI bit2 13
Isolated
DO bit2
4
Isolated
DI bit3 14
Isolated
DO bit3
5
Isolated
DI bit4 15
Isolated
DO bit4
6
Isolated
DI bit5 16
Isolated
DO bit5
7
Isolated
DI bit6 17
Isolated
DO bit6
8
Isolated
DI bit7 18
Isolated
DO bit7
9
Digital Input
COM 19
Isolated
GND
10
Isolated
GND 20
Isolated
VCC
3.2.10 PoE/Gigabit Ethernet Port
The GbE ports are located on front panel. Ethernet Port 1 is powered by Intel I219 Ethernet
controller, supporting 10/100/1000 Mbps, PXE , Wake on LAN and iAMT11. Connector is
RJ45 with LED indicators or M12 A code connector depending on the model.
Ethernet Ports 2~4 are powered by Intel I210 Ethernet controller, supporting 10/100/1000
Mbps, PXE , Wake on LAN and IEEE-1588 header. Connector is RJ45 with LED indicators
or M12 A-code connector depending on the model.
Each port optional supports IEEE 802.3at (PoE+) Power over Ethernet connection
delivering up to 25.5W/54V per port and 1000BASE-T GigE data signals over standard
Ethernet Cat 5/Cat 6 cable.