Installation Guide

9
Do not tamper with or adjust the safety valve setting.
Safety valve and/or pressure limiting valve.
The safety valve is also a pressure limiting valve.
When the gun trigger is released, the valve opens and the water recirculates
through the pump inlet or is discharged onto the ground.
Safety catch (see Connection of gun and hose)
Prevent accidental spraying of water.
Air outlet on plastic case and it should NOT be blocked during operation, or fire or
electric shock hazard is possible
SAFETY “MUSTS”
Caution – Danger!
1.
2.
3.
TOOLS REQUIREMENT
Electric drill (12mm), you can choose a 29/64” or 15/32” or 31/64” drill
Hammer
Wrench
Socket set or a Phillips screwdriver
Due to the weight of the pressure washer and the pulling force during use, the bracket
base must be installed on a solid surface. As a matter of convenience, please install the
pressure washer close to your cordon socket and make sure the plug can reach that socket.
USING STEPS
Choose a Place