Installation Guide

8 9
CONTAMINATION HAZARD
Maintenance and/or repair of electrical components MUST be carried out by qualified
staff.
ACCIDENT HAZARD
Shut down the appliance, cut power supply and water supply. Then, discharge the
residual pressure by triggering the gun before disconnecting the unit hose.
INJURY
HAZARD
Before using the appliance, CHECK every time that the screws are fully tightened and
that there are no broken or worn parts.
ACCIDENT HAZARD
ONLY USE detergents which will NOT corrode the coating materials of the high
pressure hose/electrical cable.
EXPLOSION AND ELECTRIC SHOCK HAZARD
ENSURE that all people or animals keep a minimum distance of 16yd. (15M) away.
INJURY HAZARD
The unit should fixed when it’s working.
This appliance can NOT be stored in damp environment;
When stopping the appliance, shut the appliance’s switch before pulling plug out;
Use only original or manufacturer approved spare parts for safety sake
Total Stop (motor stops when trigger released) does NOT always keep effective and
the appliance can NOT be at Total Stop for long time. If ineffective ( for inner seal
damaged, local voltage too low etc), MUST turn off the switch to stop the machine
during working;
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.