Installation Guide

16 17
PROBLEMS SOLUTUION
PROBLEM
PROBABLE CAUSE
SOLUTION
Pressure drops
during use
Water intake from external
tank
Connect appliance to the
mains water supply
Intake water too hot Reduce temperature
Nozzle clogged Clean nozzle
O-ring to one-way valve broken
Replace the broken
component
Intake filter dirty Clean filter
Motor “sounds” but
fails to start
Insufficient power supply
Check that the voltage of the
mains power supply line is the
same as that on the plate
Voltage loss due to use of
extension cable
Check characteristics of
extension cable
Appliance not used for long
period of time
Contact your nearest
Authorized Service Centre
Problems with TSS device
Contact your nearest
Authorized Service Centre
Water leakage
Seals worn
Have the seals replaced at your
nearest Authorized Service
Centre
Safety valve tripped and
discharging
Contact an Authorized Service
Centre
Water leakage from the water
inlet
Please use the wrench to
connect the garden hose and
the black threaded collar of
the water inlet filter