Installation Guide

14 15
Storage During Winter
Switch to the state of “OFF”
Turn off the water supply tap
Remove the plug from the socket
Discharge the residual pressure from the gun until all the water has come out of the
nozzle
Drain and wash out the detergent tank at the end of the working session. To wash out
the tank, use clean water instead of the detergent
Roll the pressure hoses
Engage the gun safety catch
To better maintain the performance of the pressure washer, please dismantle the
pressure washer and store it indoors during winter
When you use it again, please make sure to check whether there is any icing in
the water hose first. If it is partially frozen, do not pull out the high-pressure hose,
please wait for it to melt before using it normally
1.
2.
3.
4.
5.
6.
7.
8.
9.
Last, store your pressure gun.
Third, after releasing the pressure, please hold the pressure gun and pull the pressure
hose a little out, and then, retracting the pressure hose to the whole reel. Figure B for your
reference.