Manualshelf

Installation Guide

ManualsBrandsGiraffe Tools ManualsCorded Electric Pressure WashersGrandfalls 2200 PSI, minus 1/2 in. to 65 ft., Ordinary and Non-Replaceable Hose, Bach Sliver Hot Pressure Washer
11121314151617181920
12 13
Connect the water inlet hose (end with filter) to the water inlet end of the pressure
washer by hand and tighten it by hand (Please make sure that there is no debris blockage
on the filter side of the water inlet hose). See figure 6.
Turn the water supply on, making sure that the tap is fully open. Release the trigger lock.
Trigger the gun to expel the air in the unit before its working.
Turning the ON/OFF switch to the “OFF” position.
Put plug into socket of main electric power.
Choose the appropriate size nozzle for your work. Use your hands to connect the
quick-connect collar slightly downward, the required nozzle will be stuck in the quick-
connect collar, release hands and hear the sound of click, indicating that the nozzle is
successfully connected. See figure 7.
5.
6.
7.
8.
9.
10.
Figure 6: Water Inlet Hose Connect
CAUTION: Please do not use tools such as wrenchs to tighten it. That will damage to
the machine.