Installation Guide

11
Slide the pressure washer bracket onto the wall base, use 2 expansion bolts and nuts
to tighten it.
Fixing the matching end of the hose firmly into the gun handle. See figure 1 and 2.
Tighten the connector by hand only. Loosen the high pressure hose to avoid twist.
1.
2.
3.
4.
Setting Up Pressure Washer
Figure 1&2: Pressure Hose Connect
Connect the lance to pressure gun. See figure 3.
Push the trigger lock button, ensure the trigger in the “OFF” position. See figure 4 and 5.
Figure 3: Lance Connect
Figure 4&5: Trigger Lock