GRANDFALLS PRESSURE WASHER WITH 65FT PRESSURE HOSES Model P115-G20 Read before use & keep for future reference. For more information visit giraffetools.com or contact our customer service by sending an email to service@giraffetools.
MANUAL CONTENTS Product Information ------------ 03 After Use Tips ------------------------- 1 3 What’s Included ------------------ 04 Wall Mount Bracket Dimensions --- 1 5 Open-Box Check ----------------- 05 Problems Solution ------------------- 1 6 Safety Rules ----------------------- 05 Warranty ------------------------------- 1 7 Tools Requirement -------------- 09 Recommended Products ----------- 1 9 Using Steps ----------------------- 09 Note: Installation Template is attached separately.
PRODUCT INFORMATION Thank you for choosing Giraffe Tools Grandfalls Pressure Washer Series. Before using the pressure hose reel, please read the following installation instructions and refer to them when necessary. Model Power(W) Brush 1800 Vol/Freq 120V-/60Hz Pressure Hoses length 1/2 inch ×65ft Drill Size 12mm (29/64" or 15/32" or 31/64") Temperature Range 0°F- 104°F Maximum Pressure 2200PSI Shipping Weight 40.
WHAT’S INCLUDED 1. 4 x Expansion Bolts: M8*70 8. Metal Foam Pot 2. 4 x Expansion Nuts: M8 9. Pressure Washer 3. 2 x Expansion Nuts: M12 10. Metal High Pressure Gun 4. 2 x Expansion Bolts: M12*60 11. Metal Gun Lance 5. Rotating Bracket 12. 5FT Lead-in Hose(One end with filter) 6. Wall Base 13. 4 x Quick-Connect Nozzles(0°, 15°, 25°, 40° ) 7.
OPEN-BOX CHECK 1. Confirm that the above parts are included in your package. 2. Check for any scratches or damage done to the product. 3. If your product is missing parts or has visible damage upon receipt, please contact the Giraffe Tools customer service team. Note: If you notice an initial aroma upon opening your package,this is due to the sealed environment in which the package traveled overseas. SAFETY RULES Safety “Must Nos” 1.
SHOCK HAZARD 8. DO NOT jam the trigger in the opening position. ACCIDENT HAZARD 9. Check the data plate attached to the appliance. If not available, please contact the dealer. Do Not use the appliance without data plate because it’s not sure safe or dangerous. 10. DO NOT tamper with or adjust the setting of safety valve or the safety devices. EXPLOSION HAZARD 11. DO NOT alter the original diameter of the spray head nozzle and other operation setting; 12.
21. Connecting or replace plug and electrical cable MUST be carried out by qualified staff; 22. DO NOT pull fiercely when discharging the plug; 23. Electrical cable should be far away from fire and sharp object; 24. Cut the power supply immediately in case of breakdown or stop and find out the reason before re-start the appliance; 25. To be sure the appliance standing on dry surface. SAFETY “MUSTS” 1. All electrical conductors MUST BE PROTECTED against the water jet. SHORT CIRCUIT HAZARD 2.
CONTAMINATION HAZARD 9. Maintenance and/or repair of electrical components MUST be carried out by qualified staff. ACCIDENT HAZARD 10. Shut down the appliance, cut power supply and water supply. Then, discharge the residual pressure by triggering the gun before disconnecting the unit hose. INJURY HAZARD 11. Before using the appliance, CHECK every time that the screws are fully tightened and that there are no broken or worn parts. ACCIDENT HAZARD 12.
SAFETY “MUSTS” Caution – Danger! 1. Do not tamper with or adjust the safety valve setting. Safety valve and/or pressure limiting valve. The safety valve is also a pressure limiting valve. When the gun trigger is released, the valve opens and the water recirculates through the pump inlet or is discharged onto the ground. 2. Safety catch (see Connection of gun and hose) Prevent accidental spraying of water. 3.
Tips: Please measure the correct drill bit width to use. Ensuring the wall anchors have a secure fit, you may drill slightly under size since masonry materials all have different sizing properties. Note: Please install the pressure washer at a height of approximately 24-32in above the ground to maximize the function of auto-retraction. Installing the Bracket 1. Use the installation template to mark the location of the 4 holes. 2.
Setting Up Pressure Washer 1. Slide the pressure washer bracket onto the wall base, use 2 expansion bolts and nuts to tighten it. 2. Fixing the matching end of the hose firmly into the gun handle. See figure 1 and 2. Tighten the connector by hand only. Loosen the high pressure hose to avoid twist. Figure 1&2: Pressure Hose Connect 3. Connect the lance to pressure gun. See figure 3. Figure 3: Lance Connect 4. Push the trigger lock button, ensure the trigger in the “OFF” position. See figure 4 and 5.
5. Connect the water inlet hose (end with filter) to the water inlet end of the pressure washer by hand and tighten it by hand (Please make sure that there is no debris blockage on the filter side of the water inlet hose). See figure 6. Figure 6: Water Inlet Hose Connect CAUTION: Please do not use tools such as wrenchs to tighten it. That will damage to the machine. 6. Turn the water supply on, making sure that the tap is fully open. Release the trigger lock. 7.
Figure 7: Nozzle Connect AFTER USE TIPS How to Retract In order to enhance your experience with Giraffe Tools and extend the life of the pressure hose reel. First, when the cleaning task is done, please turn to the state of “OFF”, and then turn off the water supply. Second, when the high-pressure hose is filled with water after use, its automatic retracting function will be greatly affected. Please press the handle first to release pressure and drain the excess water. Figure A for your reference.
Third, after releasing the pressure, please hold the pressure gun and pull the pressure hose a little out, and then, retracting the pressure hose to the whole reel. Figure B for your reference. Last, store your pressure gun. Storage During Winter 1. Switch to the state of “OFF” 2. Turn off the water supply tap 3. Remove the plug from the socket 4. Discharge the residual pressure from the gun until all the water has come out of the nozzle 5.
WALL MOUNT BRACKET DIMENSIONS 15
PROBLEMS SOLUTUION Pressure drops during use SOLUTION PROBABLE CAUSE PROBLEM Water intake from external Connect appliance to the tank mains water supply Intake water too hot Reduce temperature Nozzle clogged Clean nozzle O-ring to one-way valve broken Intake filter dirty Replace the broken component Clean filter Check that the voltage of the Insufficient power supply mains power supply line is the same as that on the plate Motor “sounds” but fails to start Voltage loss due to use of Check
Oil leakage Motor started when gun is not triggered Contact your nearest Seals worn Authorized Service Centre Nozzle clogged Clean nozzle High pressure system or pump Contact your nearest hydraulic circuit not watertight Authorized Service Centre Appliance works Safety valve soften or nozzle intermittently clogged No water out when triggering the gun Clean the nozzle or contact your nearest Authorized Service Centre Nozzle clogged Clean the nozzle WARRANTY At Giraffe Tools, we conduct ri
4. For quality-related warranty claims, items will be replaced with a new item of equal value when available. In situations where a replacement is not available or preferred, Giraffe Tools will offer a full refund. 5. Warranties on all replacements follow the same 24-month warranty time frame as the original defective item. Warranties on fully refunded products will be voided after the refund is released. Process: ● Buyers must provide sufficient proof of purchase.
RECOMMENDED PRODUCTS 5/8" Retractable Hose Reel, 60-115ft 1/2" Retractable Hose Reel, 78-155ft Retractable Air Hose Reel Grandfalls Pressure Washer Grandfalls Pressure Washer, 65ft Pressure Hoses 25-100ft Hose Reel Cart 150-250ft Hybrid Hose with Swivel Grip 2.5-100ft Customized Garden Hose 6-100ft Scan code to visit Giraffe Tools store on Amazon.com Scan code to visit giraffetools.com Scan code to join our facebook group If you are interested in the above products, you can visit giraffetools.
WE WILL DO THE HEAVY LIFTING To purchase Giraffe Tools products and more, visit giraffetools.com or search for Giraffe Tools on Amazon.com. Complete your registration online for a 100 DAYS WARRANTY EXTENSION giraffetools.com service@giraffetools.
