GIPS Technology Co., LTD. GT-130 Reference Guide GIPS Technology Co.
GIPS Technology Co., LTD. Content 1 Introduction .............................................................................................................. 3 1.1 Main Features..................................................................................................................... 3 1.2 Description ......................................................................................................................... 3 1.3 Product outline ..............................................
GIPS Technology Co., LTD. 1 INTRODUCTION 1.1 Main Features • Meet IEEE 802.15.4a UWB • BLE 5.0 • SOS Button • Vibration, Buzz Alert • IP66 • RFID (ISO14443A) • ToF/TDoA Mode Supported • Smart Rest Mode 1.2 Description GT-130 is the UWB tag used in GIPS Real Time Location System (RTLS) solution, supports the TOF / TDOA positioning algorithm. GIPS RTLS solution can be applied in hospital, factory, warehouse and other fields.
GIPS Technology Co., LTD. 1.
GIPS Technology Co., LTD. Product outline 2 PRODUCT SPECIFICATION General Standard IEEE802.15.4a BLE 5.0 External I/O SOS button, 4-pin connection Dimension (mm) 88x56x9.
GIPS Technology Co., LTD. Temperature • • • Charging: 0°C~45°C Operating: -20°C~60°C Storage: -10°C~55°C Humidity • • Operating: 0%~90% without condensation Storage: 0%~90% without condensation UWB Working Frequency 3.25GHz~6.75GHz (Channel 2/3/5) Physical Rate 110 Kbps / 850 Kbps / 6.8 Mbps (Adjustable) Output power (25ºC) -41.3dBm/MHz Channel Bandwidth 500 MHz Antenna Specification Chip antenna, peak gain 5dbi (average) Working Mode ToF / TDoA BLE Protocols Bluetooth v5.
GIPS Technology Co., LTD. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
GIPS Technology Co., LTD. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
