GIPS Technology Co., LTD. GA-210 Reference Guide GIPS Technology Co.
GIPS Technology Co., LTD. Content 1 Introduction .............................................................................................................. 3 1.1 Main Features ................................................................................................................ 3 1.2 Description..................................................................................................................... 3 1.3 Product outline........................................................
GIPS Technology Co., LTD. 1 INTRODUCTION 1.1 Main Features • Meet IEEE 802.15.4a UWB • Meet IEEE 802.11 b/g/n • Support power-over-ethernet 802.3af • 10/100M Ethernet • BLE 4.2 • ToF/TDoA Mode Supported 1.2 Description GA-210 is the UWB anchor used in GIPS Real Time Location System (RTLS) solution, supports the TOF / TDOA positioning algorithm. GIPS RTLS solution can be applied in hospital, factory, warehouse and other fields.
GIPS Technology Co., LTD. 1.
GIPS Technology Co., LTD.
GIPS Technology Co., LTD. 2 PRODUCT SPECIFICATION General Standard IEEE802.15.4a IEEE802.11 b/g/n IEEE802.3af BLE 4.2 External I/O DC power jack RJ45 connector Reset button Dimension (mm) 128 x 134 x 37 Weight (g) 250 Power Requirement +5V DC-in / Powered LAN(POE) Power Dissipation < 1.
GIPS Technology Co., LTD. Wifi Protocols IEEE 802.11 b/g/n (802.11n up to 150 Mbps) Frequency Range 2.3GHz ~ 2.5GHz Antenna Specification Built-in flex antenna, peak gain 3.
GIPS Technology Co., LTD. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
GIPS Technology Co., LTD. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
