User's Guide

4.2 The wiring diagram to connect the light.
⑤
Power on after completion of
wiring, and the device is
turned on by default, Press
and hold the button for about
5s seconds until the WiFil
blue LED blinks fast.
⑥
Enter the App, tap "+"in the
upper right of the page to
enter network connection
page.
⑦
Please make sure the
device's indicator light rapidly
ashes (2 times per second)
tap to go on to the next step.
⑧
Input your WiFi & password.
⑨
Name your device.
⑩
When the WiFi LED is on ,
the device is online. Start to
control now!
④
Please wire the device according
to the marking on the cover.
ON/OFF operating principle:
The connected appliances work/stop through live
wire power on/off. The device must be powered by
L and N
Warning: S1 and S2 can only be connected to the two ends of the
wall, and cannot be connected to strong power such as zero-re line.
4.1
The wiring diagram to connect the electrical appliance .
4 5 6