Installation Guide

INSTALLATION INSTRUCTIONS
SPLASHABLES
FOR
GINGER
505L
BASKET
TO PREVENT LOSS OF SMALL PARTS, COVER
DRAIN BEFORE BEGINNING.
■
1. Starting from the corner use the measurements
shown on the drawing at left and mark the location
of the mounting screw holes on the walls.
■ 2. To mount on Tile, Drill 1/4” (6mm) holes on the
marks. To mount on Drywall, Drill 3/16” (5mm)
holes on the marks.
■ 3. Push the plastic wall anchors into the holes until
the flanges contact the wall.
■ 4. Insert the mounting screws through the basket
frame and posts and tighten into wall anchors.
■
5. Insert screw covers. Wetting the black rubber on
the cover will make insertion easier.
CARE OF FINE BRASS
The finish is protected with a clear, durable, baked-on
enamel. To clean, use warm soapy water, and dry
with a soft cloth. Occasional paste waxing is also
recommended. NEVER use brass polish, abrasives or
abrasive wax.
6”
2.5”
6.75”
CORNER