Installation Guide

CARE OF FINE BRASS
The finish is protected with a
clear, durable, baked-on
enamel. To clean,use warm
soapy water, and dry with a soft
cloth. Occasional paste waxing
is also recommended. NEVER
use brass polish, abrasives or
abrasive wax.
HANGING TISSUE HOLDER
INSTALLATION INSTRUCTIONS
1. Trace screw hole positions for mounting
bracket onto wall at desired mounting
location.
2. Drill 3/16” (5mm) holes in drywall,
1/4” (6mm) in tile at screw hole marks.
Insert anchors and
tap flush with wall.
3. Position mounting
bracket over anchors
and install screws.
4. Place rosette and post assembly
over mounting bracket.
5. Tighten the set screw with hex key.
6-24-99