Yeti Front Container Pilot Manual v1.
Options Rescue Soft Shackle • Dyneema line • lightweight • Weight: 7g Yeti Y bridle • shoulder attachment • for Yeti & Yeti Convertible • Weight: 42g Yeti Xtrem bridle • main caribiner attachment • Velcro backing • Weight: 76g Lite Yeti rescue Y bridle • Dyneema shoulder attachment • 2 sizes: 80cm, 125cm • Weight: 40g Included or O[j_ h[iYk[ YWhWX_d[h )+] 3
Bridle to rescue attachment 2 Bridle attachment 3 4 Y bridle R es c u e 1 Pass the Y bridle through the rescue attachment Pass the ends of the Y bridle through the base Pull to make a clean knot 4
Rescue handle attachment 1 Handle attachment 2 3 Pass the handle through the center loop Pass the handle through itself 4 Pull to make a clean knot 5
1.
9 Pass the plastic wire through the cloth eyelets 10 Remove string & pass the plastic wire into pockets 11 12 Put the edges of the handle Tighten the elastic bands into the covers & tuck behind the rescue 7
2. Packing- main carabiner attachment bridle 1 2 Make a knot with rescue bridle 4 Arrange the bridle like the grey arrow. 3 Velcro on bridle. 5 Insert the black webbing into the buckle on the blue and red bridle. 6 Put the rescue on the bridle. Join the rescue handle to rescue.
7 Use string to fasten the flaps 10 Pull the draw strings tight to secure the rescue 8 Insert the yello wire into the pockets 9 Put the edges of the handle into the cover 11 Tuck the draw strings behind the container Attach the Y bridle to the main carabiners 9
Bridle to harness Attach the red strap or front bridle to the main carabiner Pass the chest strap through For the Yeti and Yeti the adjustable loops in the Convertible, attach the rear Y bridle tunnel to the main 10
Shoulder attachment Pass the Y bridle up though the bridle tunnel Attach the bridle to the Soft Shackle & shoulder attachment points Cover the Soft Schackle with the neoprene cover 11
Soft Shackle 1 Pass the Soft Shackle line through the connections 2 times 5 Wrap the velcro around one side of the line 2 3 Pass the loop end of the line through the velcro base loop 4 Pass the velcro base through the loop end Pull tight on the velcro base to make a clean knot 6 Cover the Soft Shackle attachment using the Maillon rapide cover 12
