Genie Race 3 Front Rescue Container Packing Manual v1.
1 Follow your rescue parachute folding instructions and start with your rescue as shown 5 Carefully group your lines at the bottom of the container 2 Place the top edge of your rescue into the container bag 6 Make one fold of the lines underneath the rescue about 12-15cm 3 Begin to fold your rescue into the container bag by making folds that are nearly the same size as the bag 7 4 Finish your folds so that the bottom edge and your lines face down toward the opening of the bag 8 Use the rubber-
9 Make a clean loop with the para-cord and pass it through the rubber-band 13 Make sure your folds look like this before continuing 10 Follow the image above to neatly fold the para-cord 14 Continue folding the para-cord as shown 11 fold 1 figure-8 loop with the para-cord 15 Carefully stack the line sections at the bottom of the container 12 Place a rubber-band around both ends of the figure-8 loop 16 Use the rubber-band located at the bottom of the center flap to pass through the bottom right e
17 18 Pass the rubber-band through the Repeat this step, passing the rubber-band through the left eyelet center eyelet in the bottom flap 21 Secure the para-cord with the rubber-band and make sure your loops are clean 20 Repeat this with the LEFT then the RIGHT eyelets 22 1 3 19 2 4 You should secure the para-cord in this order Your finished packing should look like this, make sure all line sections are neat and secure 4
