User Manual

10
ENGLISH
[REZERO ] Operation
INDICATOR: ● LIGHT ○ FLASH
1: ZERO 2: STA 3: NET 4: SET/HOLD 5:Lb 6: BT 7:AC
OPERATION DISPLAY INDICATOR
WEIGHT 1 2 3 4 5 6 7
WEIGHT STABLE MODE 0,00 ● ● ●
(1) Put weight on plate (Ex. 0.50kg) 0,05 ● ●
(2) PRESSED [REZERO] KEY 0,00 ● ● ●
(3) Remove the plate weight -0,05 ● ●
(4) PRESSED [REZERO] KEY 0,00 ● ● ●
NOTE: If plate the weight is over set re-zero range (± 2%FS) , Then press [REZERO] key, After the scale
has three beep sound .This can not re-zero operation information.
[TARE ] Operation
One Touch Tare
INDICATOR: ● LIGHT ○ FLASH
1: ZERO 2: STA 3: NET 4: SET/HOLD 5:Lb 6: BT 7:AC
OPERATION DISPLAY INDICATOR
WEIGHT 1 2 3 4 5 6 7
WEIGHT STABLE MODE 0.00 ● ● ●
(1) Put weight on plate (Ex. 0.50kg) 0.05 ● ●
(2) PRESSED [TARE] KEY 0.00 ● ● ●
(3) Remove the plate weight -0.05 ● ● ● ●
(4) PRESSED [TARE] KEY 0.00 ● ● ●
NOTE: If the tare-weight is over tare range (<50%FS), the scale sound three beep, when tare key was
pressed.
[Weight Hold] Operation
INDICATOR: ● LIGHT ○ FLASH
1: ZERO 2: STA 3: NET 4: SET/HOLD 5:Lb 6: BT 7:AC
OPERATION DISPLAY INDICATOR
WEIGHT 1 2 3 4 5 6 7
WEIGHT STABLE MODE 0,00 ● ● ●
(1) Put weight on plate 10,00 ● ●
(2) PRESS [ ↑ ] KEY 10,00 ● ●
(3) Remove the plate weight 10,00 ● ● ○ ●
(4) PRESS [ ↑ ] KEY 0,00 ● ● ●