Spec Sheet

Gillette Generators, Inc. •
••
• 2921 Thorne Dr. •Elkhart, IN • 46514 • Ph: 574-264-9639 • Fax: [phone] • Web: www.gillettegenerators.com • spc4-160810
2
GENERATOR SPECIFICATIONS
Manufacturer ................................... Stamford Electric Generators
Model & Type ............ UCI224F-06, 4 Pole, 4 Lead, Single Phase
....... UCI224F-311, 4 Pole, 12 Lead re-connectable, Three Phase
.......................... UCI224E-17, 4 Pole, 6 lead, 600V, Three Phase
Exciter ..................................................... Brushless, shunt excited
Voltage Regulator ....................................... Solid State, HZ/Volts
Voltage Regulation ................................ ½%, No load to full load
Frequency ................................ Field convertible, 60 HZ to 50 HZ
Frequency Regulation ......... ± ½% (½ cycle, no load to full load)
Unbalanced Load Capability ..................... 100% of standby amps
Total Stator and Load Insulation ........................... Class H, 180°C
Temperature Rise ......... 120°C R/R, standby rating @ 40°C amb.
1 Ø Motor Starting @ 30% Voltage Dip (240V) ............ 168 kVA
3 Ø Motor Starting @ 30% Voltage Dip (208-240V) ..... 190 kVA
3 Ø Motor Starting @ 30% Voltage Dip (480V) ............ 260 kVA
3 Ø Motor Starting @ 30% Voltage Dip (600V) ............ 290 kVA
Bearing ..................................................... 1, Pre-lubed and sealed
Coupling ......................................................... Direct flexible disc.
Total Harmonic Distortion ............... Max 3½% (MIL-STD705B)
Telephone Interference Factor ............ Max 50 (NEMA MG1-22)
Deviation Factor ................................. Max 5% (MIL-STD 405B)
ENGINE ___________________________________
Manufacturer ............................................................... John Deere
Model and Type ..................... 4045TF285, 4 cycle, liquid Cooled
Aspiration ................................................................ Turbocharged
Cylinder Arrangement ................................... 4 Cylinders, In-Line
Displacement Cu. In. (Liters) ........................................... 275(4.5)
Bore & Stroke In. (Cm.) ............................. 4.9 x 5.0 (10.6 x 12.7)
Compression Ratio .............................................................. 19.0:1
Main Bearings & Style ............................... 6, Replaceable Inserts
Cylinder Head ................................................................. Cast Iron
Pistons ............................................................ 4, Aluminum Alloy
Crankshaft .................................................................. Ductile Iron
Exhaust Valve ........................................................ Stainless Steel
Governor ........................................ JDEC, Electronic Level, EUP
Frequency Regulation ........................................................ ± 1/4%
Air Cleaner ......................................... Dry, Replaceable Cartridge
Engine Speed ................................................................. 1800 rpm
Max Power, bhp (kwm) Standby .................. .................. 99 (74)
BMEP: psi (kpa) Standby ............................. .............. 159 (1096)
FUEL SYSTEM ____________________________
Type ......................................... Diesel Fuel Oil (ASTM No. 2-D)
Combustion System ............................................. Direct Injection
Fuel Injection Pump ................................. Stanadyne Rotary Type
12 VDC GLO_PLUGS ................................. Standard Equipment
Fuel Filter and Water Separator……………………...………Yes
GENERATOR FEATURES
• World Renown Stamford Electric Generator having UL-1446
certification.
• Full generator protection with Deep Sea 7420 controller,
having UL-508 certification.
• Automatic voltage regulator with over-excitation, under-
frequency compensation, under-speed protection, and EMI
filtering. Entire solid-state board is encapsulated for
moisture protection.
• Generator power ratings are based on temperature rise,
measured by resistance method, as defined in MIL-STD
705C and IEEE STD 115, Method 6.4.4.
• Power ratings will not exceed temperature rise limitation for
class H insulation as per NEMA MG1-22.40.
• Insulation resistance to ground, exceeds 1.5 meg-ohm.
• Stator receives 2000 V. hi-potential test on main windings,
and rotor windings receive a 1500 V. hi-potential test, as per
MIL-STD 705B.
• Full amortisseur windings with UL-1446 certification.
• Complete engine-generator torsional acceptance, confirmed
during initial prototype testing.
• Full load testing on all engine-generator sets, before shipping.
• Self ventilating and drip-proof & revolving field design
FUEL CONSUMPTION
GAL/HR (LITER/HR) STANDBY
100% LOAD 5.0(18.9)
75% LOAD 3.6(13.6)
50% LOAD 2.4(9.1)
OIL SYSTEM
Type ......................................................................... Full Pressure
Oil Pan Capacity qt. (L) ............................................... 11.0 (10.4)
Oil Pan Cap. W/ filter qt. (L) ....................................... 11.9 (11.3)
Oil Filter .................................................. 1, Replaceable Spin-On
ELECTRICAL SYSTEM _____________________
Ignition System ............................................................. Electronic
Eng. Alternator and Starter:
Ground ..................................................................... Negative
Volts DC ............................................................................ 12
Max. Amp Output of Alternator ........................................ 55
Recommended Battery to -18°C (0°F): .. 12 VDC, Size BCI# 24F
Max Dimensions: .. 10 3/4" lg X 6 3/4” wi X 9" hi, with standard
round posts. Min. output at 600 CCA. Battery tray (max. dim.
at 12”lg x 7”wi), hold down straps, battery cables, and battery
charger, is furnished. Installation of (1) starting battery is
required, with possible higher AMP/HR rating, as described
above, if normal environment averages -13°F (-25°C) or cooler.
CERTIFICATIONS
All engines are EPA emissions certified. All stationary diesel
engines are Tier III complaint.
APPLICATION AND ENGINEERING DATA FOR MODEL SPJD-600-60 HZ
ENGINE SPECIFICATIONS AND APPLICATIONS DATA