Spec Sheet

Gillette Generators, Inc. •
••
•2921 Thorne Dr. •Elkhart, IN • 46514 • Ph: 574-264-9639 • Fax: [phone] • Web: www.gillettegenerators.com • spc4-180810
4
CONTROL PANEL:
Deep Sea 7420 digital microprocessor with
logic allows programming in the field. Controller has:
• STOP-MANUAL-AUTO modes and automatic engine
shutdowns, signaled by full text LCD indicators:
• Low oil pressure  Engine fail to start
• High engine temp  Engine over speed
 Low Radiator Level  Engine under speed
 Three auxiliary alarms  Over & under voltage
 Battery fail alarm
Also included is tamper-proof engine hour meter
ENGINE:
Full flow oil filter • Air filter • Oil pump • Solenoid type
starter motor • Hi-temp radiator • Jacket water pump
• Thermostat • Pusher fan and guard • Exhaust manifold
• 24 VDC battery charging alternator • Flexible exhaust
connector • ”Isochronous” duty, electronic governor •
Secondary dry fuel regulator • Dry fuel lock-off solenoid •
Vibration isolators • Closed coolant recovery system with
50/50 water to anti-freeze mixture • flexible oil & radiator
drain hose.
AC GENERATOR SYSTEM:
AC generator • Shunt excited • Brushless design • Circuit
Breaker installed and wired to gen-set • Direct connection
to engine with flex disc • Class H, 180°C insulation • Self
ventilated • Drip proof construction • UL Certified
VOLTAGE REGULATOR:
½% Voltage regulation • EMI filter • Under-speed
protection • Over-excitation protection • total encapsulation
DC ELECTRICAL SYSTEM:
Battery tray • Battery cables • Battery hold down straps
• 2-stage battery float charger with maintaining &
recharging automatic charge stages
WEATHER/SOUND PROOF ALUMINUM HOUSING
CORROSION RESISTANT PROTECTION CONSISTING OF:
• 9 Heated and Agitated Wash Stages
• Zinc Phosphate Etching-coating Stage
• Final Baked On Enamel Powder Coat
• 18/8 Stainless Steel Hardware
STANDARD FEATURES FOR MODEL SP-3500-60 HZ
STANDARD FEATURES
Design & specifications subject to
change without prior notice.
Dimensions shown are approximate.
Contact Gillette for certified drawings.
DO NOT USE DIMENSIONS FOR
INSTALLATION PURPOSES.