Owner's manual

A typical combined start string for a LaserDisk (or DVD) show is:
LaserSearch PL 1KP <CR> (R) (<CR>) end-o-string
Translated into HEX ASCII, this string becomes (this is what you
would enter):
01 50 4C 30 4B 4C 0D D2 8D 00
and it would be displayed on the String Setup Menu as:
01 50 4C 30 4B 4C 0D (52) (0D) 00
This string is just like the start string shown above, except that it
sends a command to disable the front panel keypad on the
LaserDisk (or DVD) player after it sends the command to start the
show playing, but before it sends the <carriage return> that tells
the LaserDisk (or DVD) player to start acting upon all the com-
mands it has just received.
The following is a partial listing of the commands supported
by Pioneer LaserDisk (or DVD) players. It is by no means a com-
plete list of all of the commands available to you, but includes
those common commands which you may actually need.
Remember that you only need to send the <carriage return>
(0D) (shown as the last character of all the commands) only if
you aren’t following the current command with any other com-
mand. The <carriage return> tells the LaserDisk (or DVD) player
to start working on all of the commands it has received since the
last <carriage return> was received.
GILDERFLUKE & CO .• 205 SOUTH FLOWER STREET • BURBANK , CALIFORNIA 91502 • 818/840-9484 • 800/776-5972 • FAX [phone]
E
AST COAST /FLORIDA OFFICE • 7041 GRAND NATIONAL DRIVE • SUITE 128d • ORLANDO , FL. 32819 • 407/354-5954 • FAX [phone]
164 of 178