Owner's manual

- Smart Brick Brain 1/4 J6 Setup Menu -

This menu is used to configure the individual optically isolated

inputs on the 1/4 J6 cable. The last two settings on the menu can

also be set on the main menu. Because this menu shows a

snapshot of the state of the 1/4 J6 input each time it redraws, it is

also a useful tool for diagnosing wiring problems with this port.

1/4-J6 Input Setup

PAUSE CONT. STOP

INPUT and EDGE [rtz] [inc] START LOOP STOP at END TAPE DECK

a) J6 input Closing: |______|______|______|__on__|______|______|_________|

b) J6 input Opening: |______|______|______|______|______|______|_________|

0) bit 0 (now = closed): sequentially start shows __5 thru _17 (next = __5)

1) bit 1 (now = open ): randomly start (loop) shows _22 thru _42

2) bit 2 (now = open ): randomly start (loop) shows _55 thru 117

3) bit 3 (now = open ): loop show #__8: '***_Show___8_***'

4) bit 4 (now = closed): Direct select show __5: '***_Show___5_***'

5) bit 5 (now = open ): Direct select show __6: '***_Show___6_***'

6) bit 6 (now = open ): Select schedule 12

7) bit 7 (now = open ): Select schedule 17

c) select from J6- yes

d) direct select- yes

m) more... o) load defaults r) download configuration x) eXit

enter command-

Input Triggering Commands:

“a” '1/4 J6 Port' Input Closing Edge:

“b” '1/4 J6 Port' Input Opening Edge:

Each Rack Smart Brick Brain has two opto-isolated ex-

ternal inputs, one push button input on the front, and

one 1/4 J6 Port input. Additionally, the Smart Brick Brain

treats the end of a countdown just like it would treat any

of the other inputs. These commands are used to select

what actions will take place on each edge of each of

the 1/4 J6 Port inputs. Note that both rising and falling

GILDERFLUKE & CO .• 205 SOUTH FLOWER STREET • BURBANK , CALIFORNIA 91502 • 818/840-9484 • 800/776-5972 • FAX 818/840-9485

AST COAST /FLORIDA OFFICE • 7041 GRAND NATIONAL DRIVE • SUITE 128d • ORLANDO , FL. 32819 • 407/354-5954 • FAX 407/354-5955

110 of 178