Owner's manual

- Smart Brick Brain Delay Setup Menu -
This menu is used to set the sixteen possible different delays
that can be accessed from the front panel rotary switch. Any of
these delays can be set anywhere between 00:00:00 and
99:59:59. If at the start or end of a delay a length of zero is
found, the delay will be stopped. If you want to disable all the
displays, you can simply enter zero lengths for all sixteen possible
entries.
- Gilderfluke & Co. Rack Smart Brick Brain - rev. 2.00 copyright 1991-2000 DCM -
Delay Setup
0) delay 0- 00:00:00
1) delay 1- 00:00:15
2) delay 2- 00:00:30
3) delay 3- 00:01:00
4) delay 4- 00:02:00
5) delay 5- 00:03:00
6) delay 6- 00:05:00
7) delay 7- 00:07:30
8) delay 8- 00:10:00
9) delay 9- 00:15:00
A) delay A- 00:20:00
B) delay B- 00:25:00
C) delay C- use schedule 32
D) delay D- use schedule 27
E) delay E- use schedule 54
F) delay F- use schedule 11
m) more... o) load defaults r) download configuration x) eXit
enter command-
0-9, A-F Set Delays:
These commands are used to set the length of each
of the sixteen possible delays.
“m” More.....:
This command allows you to select from the other
menus:
1) Main Menu. This brings you back to the main
GILDERFLUKE & CO .• 205 SOUTH FLOWER STREET • BURBANK , CALIFORNIA 91502 • 818/840-9484 • 800/776-5972 • FAX [phone]
E
AST COAST /FLORIDA OFFICE • 7041 GRAND NATIONAL DRIVE • SUITE 128d • ORLANDO , FL. 32819 • 407/354-5954 • FAX [phone]
105 of 178