Owner's manual

#28 38 gray not used
#29 39 white not used
#30 40 black not used
#31 41 brown not used
#32 42 red not used
#33 43 orange not used
#34 44 yellow not used
#35 45 green not used
#36 46 blue not used
#37 47 violet not used
#38 48 gray not used
#39 49 white not used
#40 50 black not used
n/a 51 black power supply ground
n/a 52 black power supply ground
n/a 53 black power supply ground
n/a 54 black power supply ground
n/a 55 black power supply ground
n/a 56 red + power supply input
n/a 57 red + power supply input
n/a 58 red + power supply input
n/a 59 red + power supply input
n/a 60 red + power supply input
To simplify wiring to any MACs Animation Control System, the connectors used on the J6/A
cables are what are called 'insulation displacement connectors'. These simply snap on to an
entire cable, automatically 'displacing' the wire insulation and making contact with the wires
within. This means that an entire forty wire cable can be terminated in seconds. All connectors
are polarized, to keep them from being plugged in backwards.
GILDERFLUKE & C
O
.¥ 205 S. FLOWER ST. ¥ BURBANK, CA 91502 ¥ 818/840-9484 ¥ 800/776-5972 ¥ FAX [phone]
6 of 22