User Manual

DipSwitch 5
Dipswitch 6
Output under
test goes to
this level
off
off
100%
on
off
50%
off
on
25%
on
on
Disables ALL
ʻTestsʼ
7. ! DipSwitch 7: European (0-511) or USA (1-512) DMX-512 Addresses
!!On version 3.0+ Lg-DMX/DC, this switch allows you to select whether the DMX-512 addresses set on
the three rotary switches are entered in the European (0-511) or American (1-512) ranges of numbers. The
American DMX-512 channel ‘1’ is the same as the European DMX-512 channel ‘0’. This feature was not
available on previous versions of the Lg-DMX/DC.
a) If off, then DMX-512 addressing is from 0-511
b) If on, then DMX-512 addressing is from 1-512
! ! Most GilderGear uses the European-style (0-511) addressing.
8. ! DipSwitch 8: Disable on loss of DMX-512
!!On version 3.0+ Lg-DMX/DC, The Lg-DMX/DC can be set turn off all the outputs when the DMX-512
input goes away. On previous versions of the Lg-DMX/DC, this feature was on Dipswitch #2-10
a)! If off, then all outputs will be forced ‘off’ approximately ten seconds after the DMX-512 is lost.
b)! If on, then the outputs will stay at the last level set by the DMX-512, even after the DMX-512 has
gone away.
Gilderfluke & Co.• 205 South Flower Street • Burbank, California 91502 • 818/840-9484 • 800/776-5972 • fax [phone]
Sd-50/xx Manual / September 10, 2012 9:58 AM / page 11 of 12