User guide

When this switch is turned on the one-shot circuit on the B input is
disabled. When used in combination with other switches, it allows
you to hold the repeater in a reset or stopped state through the B
input.
S
WITCH #9: ÔA2Õ CONTINUOUS: (THIS IS A JUMPERON THE DR-50S)
When this switch is turned on the one-shot circuit on the A input is
disabled. When this switch is ÔonÕ with a combination of other switch-
es, this will allow you to tell the AB-50 to loop as long as this input is
held active. Turning this switch ÔoffÕ will enable the one shot on the ÔAÕ
input so that a signal on this input will only start the repeater once.
GILDERFLUKE & CO. ¥ 205 S. FLOWER ¥ BURBANK, CA 91502-2102 ¥ 818/840-9484 ¥ 800/776-5972 ¥ FAX [phone]
56 of 72