Installation Guide

1
Horse Trough Instruction Sheet
A
A
C
A
C
D
B
D
B
B
C
E
D
E
D
E
Illustration #1
Illustration #2
Illustration #3
Optional Mountings
B
2.68" - 4"
4.5" - 6"
2.68" - 4"
4.5" - 6"
Parts included:
A. 1 Horse Trough
B. 10 Screws
C. 10 Self-locking Nuts
D. 2 Short Brackets
E. 2 Long Brackets
Assembly Instructions
(Tools Required- Not Included)
HINT: Nuts should always be on opposite side of wood
rail.
HINT: Since the nuts (C) are self-locking, it will save time
using a screwdriver to hold the screws when unscrewing the
nuts.
1. If the trough (A) is to be mounted on wall, always use
proper anchors depending on your material. Please note
you will need to remove the included screws (B) to
See Illustration #1 for wall-mounting.
2. If mounting trough over a fence or deck rail, you will
need to mount bracket (D) to the back of the trough (A)
with the four screws (B) included with the trough (A), as
shown in Illustration #2. You will then need to mount the
(B). See illustrations 2 and 3.
NOTE: Use the short end of the enclosed bracket (E) for
2.68 - 4"(6.8-10.16 cm) railings, and use the long end
for 4.5-6"(11.43-15.24 cm) railings.
Made in China
Hecho en China
Manufactured and Distributed by
Midwest Air Technologies, Inc
Long Grove, IL 60047