GiiNii NuLife 2.4-inch LCD “Full Size” Photo Scanner User Manual • Before operating this product, carefully read and follow the instructions. • Please retain this user manual for future reference.
CONTENTS SAFETY INFORMATION................................................3 PACKAGE CONTENT....................................................4 SCANNER PARTS..........................................................5 PRODUCT SETUP..........................................................6 - Connecting to Power...................................................................6 - Inserting a SD/MMC Card.............................................................7 - Turning on the Scanner..................
SAFETY INFORMATION • • • • • • • Retain this User Manual for future reference. Read the safety and operating instructions carefully before using the product. All warnings on the product and in the operating instructions should be observed. Do not place this product under direct sunlight or near heat sources, such as in a closed car under sunlight or near a stove. The outer casing of this product may become deformed and the sophisticated sensors inside may become damaged due to excessive heat.
Thank you for purchasing this GiiNii NuLife 2.4-inch LCD “Full Size” Photo Scanner. With this new standalone scan-and-view technology, scanning is easy! There is no software installation or PC needed. You can preview the scanned images instantaneously on the 2.4” display screen, and store them directly into a MMC or SD memory card. It makes your scanning experience easier and enjoyable. You can also transfer the scanned images to your PC via mini USB port.
SCANNER PARTS Top View 8 9 10 11 1 2 3 4 5 6 7 Rear View 12 13 14 Names 1 Paper guide 2 3 4 5 6 7 8 Descriptions • Used to guide the material to be scanned to improve alignment. Feeding slot • Feeds the paper or photo for scanning. 2.4” LCD screen • Views the scanned images. Power( )/Menu • Press to turn the power to on or off. • Long press for 3~5 seconds to turn off the scanner. • Press to display the setting menu. • Press to make or confirm selections in the menus.
PRODUCT SETUP Connecting to Power Using AC adapter Connect one end to the scanner’s DC IN jack, and the other to wall socket. To DC IN 5V To wall socket Using mini USB cable as a power source 1. Connect the mini USB connector to the scanner, and the other 2 regular USB connectors to laptop or PC. mini USB cable (supplied) 2. Press Power ( MENU Laptop ) button to bring up the USB Mode menu. USB Mode USB Power Mass Storage Please insert a SD/MMC card! 3.
Inserting a SD/MMC Card Insert your SD or MMC card into the card slot with the gold contacts facing up. Rear View Turning on the Scanner Press Power ( MENU ) button to turn on the scanner.
SCAN AND PLAYBACK Scanner Setting 1. Press MENU( ) button to enter the scanner setting menu. 2. Press LEFT( )/RIGHT( ) button to MENU select Scan ( ) or Setup ( ) . 3. Press UP( )/DOWN( ) button to select an option from the submenus. Note: Press MENU( ) button repeatedly to go to the upper level, or exit the Scan menu. MENU Menus Scan( Sub-menus ) Color Mode( Descriptions Selects a scan mode: Gray( ), Color( ).
Using the Photo Protective Sleeve It is recommended to use the supplied photo protective sleeve for photo scanning. Please place the photo inside the protective sleeve. Make sure the sealed end goes first into the feed slot for scanning. Note: Do not use the sleeve for laminated photos. Scanning Images Note: “Please insert a SD/MMC card”. A reminder message will appear if you did not insert a SD or MMC card to the scanner. 1.
2. Press Scan ( ) button, the photo or document will be rolled through and scanned. Note: Wait until scanning is complete. 3. The scanned image will appear on the screen and saved onto the inserted memory card. Note 1: By default the folder \DCIM\100NVtim will be created in the inserted memory card. All scanned images will be saved in the 100NVTIM folder. When the counter reaches 9999 it will be automatically generated another new folder in a sequential order.
3. Press LEFT( )/RIGHT( ) button repeatedly to move to the previous or the next page. 4. Press UP( )/DOWN( )/LEFT( )/RIGHT( ) button to select an image, and then press OK( OK ) button to view the image in full screen. Zoom 1. Press ZOOM( ) button to zoom in an image. Each time of the button is pressed, the image will be enlarged in the sequence of x2, x3, x4, and x5. 2. Press UP( )/DOWN( )/LEFT( )/RIGHT( ) button to move the pointer to view the zoom-in image at the pointed area.
Playback Setting 1. Press MENU( ) button to enter the playback setting menu. 2. Press LEFT( )/RIGHT( ) button to select Playback ( ) or Setup ( ) . 3. Press UP( )/DOWN( ) button to select an option from the submenus. Note: Press MENU( ) button repeatedly to go to the upper level, or exit the Playback menu. MENU Delete Rotate MENU Menus Sub-menus Playback( Setup( ) Descriptions ) Delete( ) Delete the scanned image(s): One( ), All( ).
TRANSFERRING THE SCANNED IMAGES TO PC ATTENTION: To get proper connection with your PC and the unit, please turn the power off before making the connection. 1. Connect the mini USB connector to the scanner, and the master connector to PC. Master connector mini USB Cable (supplied) 2. Press Power ( MENU ) button to bring up the USB Mode menu. USB Mode USB Power Mass Storage 3. Press UP( )/DOWN( ) button to select Mass Storage, then press OK( OK ) button. 4.
CLEANING AND CALIBRATING THE SCANNER • To get high image quality and good recognition results, please perform step 1, 2, 3 in that order prior to use if necessary. • Make sure the cleaning and calibration paper, and cleaning stick are clean without any dust before use. • Do not use any solvent to clean the sensor. Step 1: Using the cleaning paper Insert the supplied cleaning paper into the feed slot of the scanner, then press SCAN( ) button to rolled through and scanned.
3. Align the feed slot cover. Assembly the edge’s two latching tabs with the mounting holes on the scanner. Push the cover back in until it clicks in place. Step 3: Using the calibration paper 1. Insert the calibration paper with the white side DOWN into the feed slot. 2. Press MENU( MENU ) button to bring up the System Menu. 3. Press LEFT( )/RIGHT( ) button to select Setup ( ) button then press UP( )/DOWN( ) button to select “Calibration”. 4. Select OK ( OK ) to begin the calibration process.
SPECIFICATION Scan Sensor Display Scan Size Scan Speed(A4 size) Supported OS for Mass storage Memory Card Slot I/O USB port File Format OSD language Buttons Dimensions Weight Linear Color CIS 2.4” Color TFT LCD (480 x 234 pixels) Minimum: 38.1mm x 50.8mm (1.5” x 2”) Maximum: 216mm x 356mm (8.5” x 11”) 10 sec at gray 300dpi 15 sec at color 300dpi Windows XP / Vista / 7 Mac OS X (10.4 / 10.5 / 10.
GiiNii 90 DAY LIMITED WARRANTY WARRANTY COVERAGE: This warranty obligation is limited to the terms set forth below. WHO IS COVERED: This product is warranted to the original purchaser or the person receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase (“Warranty Period”) from an Authorized Dealer. The original sales receipt showing the product name and the purchase date from an authorized retailer is considered such proof.
or any software, even if packaged or sold with the product. NonGiiNii hardware manufacturers, suppliers, or publishers may provide a separate warranty for their own products packaged with the bundled product. The Company is not liable for any damage to or loss of any programs, data, or other information stored on any media contained within the product, or any non-GiiNii product or part not covered by this warranty.
• A product used for commercial or institutional purposes (including but not limited to rental purposes). • Product lost in shipment and no signature verification receipt can be provided. • Failure to operate per Owner’s Manual. TO OBTAIN ASSISTANCE Send an email to customerservice@giinii.com. For technical support call toll free: 1-866-909-3550 R E PA I R O R R E P L A C E M E N T A S P R O V I D E D U N D E R T H I S WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CONSUMER.
GiiNii International Product Registration P.O.
