Operation Manual

89
Gigaset SL450A GO / LUG IE-UK en / A31008-M2721-L101-1-7619 / settings_HS.fm / 7/16/15
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Handset
Keypad illumination
You can set the brightness of keypad illumination in 5 increments.
¤ . . . use to select Settings OK Display & Keypad OK Key
Illumination OK . . . use to select Brightness (1 - 5) Save
Activating/deactivating automatic keypad lock
Automatically lock the keypad when the handset has been in idle status for around 15 seconds.
¤ . . . use to select Settings OK Display & Keypad OK Auto
Keypadlock Change ( = on)
Activating/deactivating Auto Answer
When set to Auto Answer, the handset accepts an incoming call as soon as it is removed from the
charging cradle.
¤ . . . use to select Settings OK Tele ph ony OK Auto Answer
Change ( = on)
Regardless of the Au
to Answer setting, the connection ends as soon as you place the handset
back in the charging cradle. Exception: Press and hold the handsfree key for a further
2 seconds while placing the handset in the charging cradle.
Changing the earpiece and handsfree volume
You can set the volume of the earpiece and speaker at 5 levels independently of each other.
During a conversation
¤ Handset Volume . . . use to select volume Save . . . the setting is saved
In idle status
¤ . . . use to select Settings OK Audio Settings OK Handset
Volume OK . . . then
Changes are only saved permanently in Profile Personal.
Without saving, the setting is automatically saved after around 3 seconds.
For the earpiece:
¤ Earpiece: . . . use to set the volume
For the speaker:
¤ Speaker . . . use to set the volume
Save settings:
¤ Save