Operation Manual

84
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Repeater
Gigaset SL450A GO / LUG IE-UK en / A31008-M2721-L101-1-7619 / extending.fm / 7/16/15
Repeater
A repeater increases the receiving range between the Gigaset handset and the base station.
The registration procedure for a repeater depends on the version of the repeater being used.
• Repeater without encryption, e.g. Gigaset repeater prior to Version 2.0
• Repeater with encryption, e.g. Gigaset repeater later than Version 2.0
Further information about the Gigaset repeater can be found in the repeater user guide and at
www.gigaset.com/gigasetrepeater.
Repeater without encryption
Activate Maximum Range/deactivate No Radiation
¤ . . . use to select Settings OK ECO DECT OK Maximum
Range Change ( = on) No Radiation Change ( = off)
Deactivate encryption
¤ use to select Settings OK System OK Encryption
Change ( = deactivated)
Registering a repeater
¤ Connect the repeater to the mains power supply Press and hold the Registration/paging
key on the telephone base station (min. 3 secs) . . . the repeater is automatically registered
It is possible to register more than one Gigaset repeater.
Repeater with encryption
Registering a repeater
¤ Connect the repeater to the mains power supply Press and hold the Registration/paging
key on the telephone base station (min. 3 secs) . . . the repeater is automatically registered
Up to 2 repeaters may be registered.
The ECO DECT function M
aximum Range is activated and the No Radiation function is
deactivated. The settings cannot be changed whilst the repeater is registered.
As soon as a repeater is registered, it will
appear in the repeater list under
Settings Syste
m Repeater
De-registering a repeater
¤ . . . use to select Settings OK System OK Repeater
OK . . . use to select repeater De-reg. Yes
Encryption is activated (default setting).