Operation Manual

Gigaset S850A GO / LUG GR en / A31008-M2625-T101-1-8U19 / extending.fm / 6/4/15

Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0

Operation with a PABX

Saving an access code (outside line code)

Setting the access code (e.g. "0") for dialling using the fixed line network and using VoIP.

¤ . . . use to select Settings OK Telephony OK Access

Code OK . . . then

Setting pauses

¤ . . . then

To enter dialling pause when dialling:

¤ Press and hold the Hash key . . . a P appears in the display.

Switching temporarily to tone dialling (Tone)

After dialling the external number or after establishing the connection:

¤ Press the Star key briefly.

After the call ends, pulse dialling

is automatically reactivated.

Fixed line network: ¤ Access external line with: . . . use to enter or change access

code, max. 3 digits

VoIP:

¤ Access external line with: . . . use to enter or change

access code, max. 4 digits.

Rule:

¤ For . . . use to select when the access code should be

dialled

Call Lists: The access code will only prefix numbers from a list (list

of answered calls, list of missed calls, SMS list, answer machine list).

All calls: The access code prefixes all numbers dialled.

Off: The access code is deactivated and does not prefix any

telephone number.

Save:

¤ Save

The access code never prefixes any emergency numbers or SMS service centre

numbers.

The access code never prefixes any SMS service centre numbers.

Pause after line seizure: 1 sec

3 secs

7 secs

¤ OK

Pause after Recall key: 800 ms

1600 ms

3200 ms

¤ OK

Dialling pause (pause after access code): 1 sec

2 secs

3 secs

6 secs

¤ OK