Operation Manual

82
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Operation with a PABX
Gigaset S850A GO / LUG GR en / A31008-M2625-T101-1-8U19 / extending.fm / 6/4/15
Deactivate encryption
¤ use to select Settings OK System OK Encryption
Change ( = deactivated)
Registering a repeater
¤ Connect the repeater to the mains power supply Press and hold the Registration/paging
key on the telephone base station (min. 3 secs) . . . the repeater is automatically registered
It is possible to register more than one Gigaset repeater.
Repeater with encryption
Registering a repeater
¤ Connect the repeater to the mains power supply Press and hold the Registration/paging
key on the telephone base station (min. 3 secs) . . . the repeater is automatically registered
Up to 2 repeaters may be registered.
The ECO DECT function M
aximum Range is activated and the No Radiation function is
deactivated. The settings cannot be changed whilst the repeater is registered.
As soon as a repeater is registered, it will
appear in the repeater list under
Settings Syste
m Repeater
De-registering a repeater
¤ . . . use to select Settings OK System OK Repeater
OK . . . use to select repeater De-reg. Yes
Operation with a PABX
To find out which settings are required for a PABX, please refer to the PABX user guide.
You cannot send or receive SMS messages on P
ABXs that do not support Calling Line
Identification.
Setting Tone or Pulse dialling mode
¤ . . . use to select Settings OK Telephony OK Dialling
Mode OK . . . use to select Tone or Pulse Select ( = selected)
Setting the flash time
¤ . . . use to select Settings OK Telephony OK Recall OK
. . . possible flash times are listed . . . use to select flash time Select ( = selected)
Encryption is activated (default setting).