Operation Manual
81
Gigaset S850A GO / LUG GR en / A31008-M2625-T101-1-8U19 / extending.fm / 6/4/15
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Repeater
Locating a handset (Paging), finding the telephone's IP address
¤ Briefly press the Registration/paging key on the base station.
All handsets will ring at the same time ("paging"), ev
en if ringtones
are switched off. Exception: handsets on which the baby monitor is
activated.
The current (local) IP
address for the base station appears in the
handset displays.
Ending the search
¤ Briefly press the registration/paging key on the base station
or Press the End call key on the handset
or Press the display key Sil
ence on the handset
or No action. After approx. 30 seconds, the pag
ing call will end automatically.
Changing the handset name and internal number
When registering multiple handsets, they will automatically be assigned the names "INT 1", " INT
2" et
c. Each handset will automatically be assigned the lowest unassigned internal number. The
internal number is shown as the name of the handset on the display e.g. INT 2. Y
ou can change
the names and the numbers of handsets. The name must not exceed 10 characters in length.
¤ . . . the list of handsets is opened, the current handset is highlighted with < . . . use
to select a handset . . . possible options:
Repeater
A repeater increases the receiving range between the Gigaset handset and the base station.
The registration procedure for a repeater depends on the version of the repeater being used.
• Repeater without encryption, e.g. Gigaset repeater prior to Version 2.0
• Repeater with encryption, e.g. Gigaset repeater later than Version 2.0
Further information about the Gigaset repeater can be found in the repeater user guide and at
www.gigaset.com/gigasetrepeater.
Repeater without encryption
Activate Maximum Range/deactivate No Radiation
¤ . . . use to select Settings OK ECO DECT OK Maximum
Range Change ( = on) No Radiation Change ( = off)
Edit name:
¤ Options Rename OK . . . use to delete the current
name . . . use to enter a new name OK
Edit number:
¤ Options Edit Handset No. OK . . . use to select a
number Save
Paging
IP: 192.168.1.2
Silence










