Operation Manual

70
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Additional functions using the PC interface
Gigaset S850A GO / LUG GR en / A31008-M2625-T101-1-8U19 / applications_2.fm / 6/4/15
Rejecting/accepting a non-registered Bluetooth device
If a Bluetooth device that is not registered in the list of known devices tries to connect to the
handset, a prompt will appear asking you to enter the PIN of the Bluetooth device (Bonding).
Changing the Bluetooth name of the handset
The handset is shown by this name on another Bluetooth device.
¤ . . . use to select Bluetooth OK Own Device OK . . . the name and
the device address are shown Change . . . use to change the name Save
Additional functions using the PC interface
QuickSync functions:
• Sync the handset's directory with Microsoft® Outlook®
• Upload CLIP-pictures (.bmp) from the computer to the handset
• Upload pictures (.bmp) as screensavers from the computer to the handset
• Upload sounds (ringtone melodies) from the computer to the handset
• Update firmware
• Cloud synchronisation with Google™
¤ Connecting the handset to the computer via Bluetooth or via a USB data cable..
Transferring data
Reject: ¤ Briefly press the End call key .
Accept:
¤ . . . use to enter the PIN of the Bluetooth device to be
accepted OK . . . Wait for PIN confirmation . . . then
Add the device to the list of known devices: Ye
s
Use the device temporarily: No . . . the Bluetooth connection can be
used, as long as the device is located within transmission range or until
it
is switched off
The Gigaset QuickSync program has been installed on the computer.
Free to download at www.gigaset.com/quicksync
Connect the handset directly to the PC, not via a USB hub.
Data transfer using Bluetooth:
• The computer has Bluetooth capability.
• A USB data cable is not plugged in. If a USB data cable is plugged in during an
existing Bluetooth connection, the Bluetooth connection is interrupted.