Operation Manual

16
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Setting up an IP account
Gigaset S850A GO / LUG GR en / A31008-M2625-T101-1-8U19 / starting_GO.fm / 6/4/15
The display shows the possible IP accounts (IP 1 to IP 6). Accounts
that are already configured are marked with .
¤ . . . Use to select the required account OK
The wizard establishes a connection to the Gigaset configuration server on the Internet. Various
profiles with general configuration data for different providers can be downloaded here.
Select provider
A list of countries is loaded.
¤ . . . Use to select the country in which you want to use the
phone OK . . . a list of providers in this country is displayed
. . . use to select provider OK . . . the general
configuration data for your provider is downloaded and stored
in the phone
Entering user data for your IP account
You are required to enter your personal access data for your IP account, e. g. Us
er ID, Password,
. . . (depending on the provider).
If the wizard does not start properly or you have terminated it: Start the VoIP wizard
using the handset menu
¤ . . . Use to select Settings OK Telephony OK VoIP
Wizard
If "New firmware available" is shown on the display, there is a firmware update
available for your phone.
To update firmware: Yes . . . the new firmware is loaded (takes approx. 6 mins.)
The Message key will then flash again.
¤ To start configuration: Press the Message key .
Select IP Account
IP 1
IP 2
IP 3
IP 4
IP 5
Back OK
If no Internet connection can be established, a corresponding error message will be
generated. For more information, see "Questions and answers" Appendix
¤ Terminate the VoIP wizard: OK . . . The VoIP wizard will close Troubleshoot if
necessary Open the wizard again later via the menu to configure the IP account.
Select a Provider
Provider 1
Provider 2
Provider 3
Provider 4
Provider 5
Back OK
If your provider does not appear in the list:
Terminate the wizard: Press and hold the End call key . . . the handset returns to
idle status . . . set up the IP account using the web configurator